The flowmeter is installed after the reservoir and the fuel filter but before the fuel injection pump.
The incoming fuel from the fuel tank to the engine goes through the EMF where it is measured and the reported data is sent to the GPS controller and the software, and the excess fuel returns to the EMF and goes back to burn out. In this way the temperature of the incoming fuel is kept relatively constant and the erros is minimized.
The appliance also has an automatic deaeration system.
Catalog Number: 002
GPS device connected to the on-board computer.
An additional feature supported by the model Nippo 22 is the ability to add an external RFID reader for driver indentification.
Catalog Number: 003
Nippo 32 is a tracker with an external GPS antenna and the ability to add two external capacitive probes to measure fuel level in the tank and a contactless RFID card reader for driver registration.
It also offers the availability of analog and digital inputs to monitor and manage external events.
Catalog Number: 004
Error reading: 3%
The capacitive probe is produced for measuring the diesel fuel level in the reservoir.
It is manufactured with lengths of 0.7 m and 1 m depending on the specific reservoir. At customer's request, it can be made up to 3 meters in length.
Catalog Number: 005
The integration of contactless RFID reader would provide complete system of control and optimization.
*Daily road list
*Monthly road list